Product Operation - brondell SMB-15 Manual Del Propietário

PRODUCT OPERATION

Using the Side-Mounted Bidet
Extend spray wand to desired location using nozzle
control handle.
To engage a wash on SMB-15, slowly turn control knob
clockwise to ON position.
To engage a wash on SMB-25, very gently push water
pressure control handle forward to ON position.
• The further forward the handle is pushed, the
higher the water pressure will be. Take care not
to initiate water at full pressure, as discomfort or
injury can occur.
• Note, if hot water supply is not connected, turn
pressure control handle to "COOL" (indicated by
blue dash) to increase water pressure as needed.
Readjust spray wand as necessary or use control
handle to create an oscillating motion for wider
cleaning range.
Once finished, pull water pressure control handle
back to OFF position and retract nozzle using nozzle
control handle. (For SMB-15, turn control knob
counterclockwise to OFF position).
Extend Wand
Turn On Water
Turn Off Water
Retract Wand
9