Publicidad
Idiomas disponibles
Idiomas disponibles
Tool Operation
Read sections titled "Safety Warnings" before operating tool.
WARNING
Do not use this product if it is not completely assembled or if any parts
appear to be missing or damaged. Use of a product that is not properly and completely
assembled or with damaged or missing parts could result in serious personal injury.
WARNING
Do not attempt to modify this product or create accessories or attachments not
recommended for use with this product. Any such alteration or modification is misuse
and could result in hazardous conditions possibly leading to serious personal injury.
If any parts are damaged or missing, please call 1-800-543-4596 for assistance.
MODEL
DS530-S1
DS530-M1
DS530-D1
SOLD SEPARATELY
INSTAllING A DS530-S1 OR DS530-M1 ADAPTER AND ATTACHMENT
1. Unplug tool from electrical supply or remove battery before installing attachment.
2. Remove the manufacturer's nose cone from the tool.
3. Remove manufacturer's bit and holder if present.
4. Choose the adapter which matches the screwdriver model and brand you are using.
5. Attach the adapter onto the screwdriver ensuring it is fully seated and secure, tighten all set screws.
NOTE: If you want to use an extension pole with the attachment, install that, now. See instructions for
using the extension pole on page 11. Otherwise, continue to next step, below.
6. Install the appropriate Senco bit, making sure it is fully seated (this may require some force.)
7. Slide the attachment onto the adapter. Make sure there's no gap between the attachment and the adapter.
Tighten clamp. Adjust the screw with a 2.5mm hex key if necessary to provide more or less clamping
force. This should only be tightened enough to prohibit the attachment from easily rotating on the adapt-
er or sliding off with minimal force. Over-tightening will only make it harder to unlock the clamp during
removal and could damage clamp components.
locked
ADAPTER
COMPATIBLE TOOLS
MB0184
SENCO • SG2510, SG4100
MB0186
MAKITA • FS2200, FS2500, FS4200, FS6200, XSF03, XSF04, XSF05
MB0183
DEWALT • DW252, DW253, DW255, DW257, DW266, DW272, DW276
MB0185
DEWALT • DCF624
MB0187
MAKITA • FS2701
Unlocked
TOOl USE
7
bit Type
DS530
EA0314
Phillips
EA0315
Square
EA0316
Rex
Publicidad
Solución de problemas
