Lavorwash SWL R 1300 Manual De Instrucciones página 58

8.4. FORWARD DIRECTION
To activate the forward direction:
Disengage the parking brake (Item 6 Figure 12), if activated (continuous beep) .
Position the direction selector (Item 4 Figure 12) as shown in Figure 30 .
Gradually press the accelerator pedal with your foot (Item 3 Figure 12) . To reach the maximum travel speed,
adjust the engine speed regulator lever (Item 2 Figure 12) to the end of the stroke (fully down) and press the
forward pedal to the end of the stroke .
Release your foot to stop the traction of the engine and gradually press the brake pedal (Item 5 Figure 12) to
finish operation of the motorsweeper.
Return the direction selector to the central (neutral) position as shown in Figure 30 .
If necessary, activate the work lights by pulling the selector upwards (only in models where the work lights are
included) . When the lights are activated the relative indicator (no. 1 Figure 18) lights up on the indicator .
8.5. REVERSE DIRECTION
To activate reverse:
Disengage the parking brake (Item 6 Figure 12), if activated (continuous beep) .
Position the direction selector back (Item 4 Figure 12) as shown in Figure 31 .
Gradually press the accelerator pedal with your foot (Item 3 Figure 12) . To reach the maximum travel speed,
adjust the engine speed regulator lever (Item 2 Figure 12) to the end of the stroke (fully down) and press the
forward pedal to the end of the stroke .
Release your foot to stop the traction of the engine and gradually press the brake pedal (Item 5 Figure 12) to
end the reverse of the motorsweeper .
Return the direction selector to the central (neutral) position as shown in Figure 31 .
NOTE 1: The reverse speed is reduced by half with respect to the forward speed .
NOTE 2: An intermittent beep signals reversing of the motorsweeper .
8.6. OPERATIONAL SHUTDOWN
To stop the engine, bring the engine speed regulator lever (Item 2 Figure 12) to a minimum (fully up) and turn
the starter key (Item 1 Figure 12) anti-clockwise until it reaches the "OFF" position.
In the event of prolonged stops, the parking brake must be engaged (Item 6 Figure 12) as described in
paragraph 8 .7 .
NOTE: the braking system is also working with the machine switched off.
It is advisable to remove the key when the engine is switched off during maintenance,
inspection and adjustment operations to prevent inadvertent or accidental ignition by
persons unrelated to the operations
Figure 30
Figure 31
58