Chapter 11 - Stability Of The Machine - Lavorwash SWL R 1300 Manual De Instrucciones

CHECK THAT THERE ARE NO PERSONS LESS THAN 2 METERS FROM THE
MOTORSWEEPER DURING THE WASTE CONTAINER EMPTYING OPERATIONS. ALSO
CHECK THAT THERE IS ADEQUATE SPACE TO AVOID SHOCKS THAT COULD DAMAGE THE
MOTORSWEEPER AND COMPROMISE ITS OPERATION.
ALWAYS INSTALL THE PROTECTION BAR AS SHOWN IN PARAGRAPH 4.4.1.
TO PREVENT ACCIDENTAL CLOSURE OF THE WASTE CONTAINER WHEN IT IS BEING
LIFTED.

CHAPTER 11 - STABILITY OF THE MACHINE

11.1. STABILITY DURING USE
The stability of the machine during travel and cleaning operations is mainly guaranteed by compliance with the
maximum slope values (para. 3.10 and 5.1) as well as by verification of the capacity of the work surface which
must be such as to withstand the value of the weight of the motorsweeper indicated on the CE plate .
The operation of emptying of the waste container, and all the maintenance, adjustment, cleaning and inspection
phases must take place on floors without slopes and such as to bear the value of the weight of the motorsweeper
indicated on the CE plate .
To ensure the necessary stability during machine parking, it will be necessary to insert the parking brake as
shown in para. 8.7. If it is not possible to leave the machine stationary on flat surfaces, it is advisable to use
dedicated wheel stop wedges .
The stability of the raised waste container for inspection, cleaning and maintenance operations is guaranteed by
positioning the safety bar as described in para . 4 .4 .1 .
11.2. STABILITY DURING TRANSPORTATION
The motorsweeper must be transported and handled considering the weight of the motorsweeper indicated on
the CE plate .
Lifting of the motorsweeper must take place as shown in para . 6 while for transportation it will be necessary
to secure the machine . For this purpose, it is possible to use the relative fastening slots (Figure 43) . Once
positioned, it is necessary to insert the parking brake as shown in para . 8 .7 using, where appropriate and in
addition, dedicated wheel stop wedges .
Figure 42
64