Lighting The Burners - Amazon Basics B0B8QV3MS2 Manual Del Usuario

Lighting the Burners

1. Make sure that all control knobs are off.
2. Turn on the gas supply from the LP (Liquid Propane) tank. Always keep your face and body as far from the grill as possible
when lighting.
3. Push and turn the main burner control knob to
button to light the burner. After the burner is lit, release the electronic ignition button and knob.
NOTICE
If the burner does not light in three to five seconds, turn the control knob off, then wait five minutes for any
excess gas to dissipate before retrying.
Lighting with Matches
If the burner will not light after several attempts, the burner can be lit with a match.
1. Before using a match, wait five minutes after your last attempt to let any accumulated gas dissipate.
2. Clip a match on one end of the lighting rod.
3. Light the match.
4. Hold the lighting rod and insert the lighted match right next to the burner ports.
5. Push and turn the designated control knob to
C AUTION
If burners go out during operation, close the gas supply at the source, and turn all gas valves off. Open the lid and wait
»
five minutes before attempting to relight (this allows accumulated gas fumes to clear).
Should a grease fire occur, close the gas supply at the source, turn off all burners, and leave the lid closed until fire is out.
»
DO NOT attempt to disconnect any gas fitting while your grill is in operation. As with all appliances, proper care and
»
maintenance will keep them in top operating condition and prolong their life. Your gas grill is no exception.
Do not close the side burner lid when the product is in use. The side burner lid will get hot if used when the lid is closed.
»
PR-KMY0YMPZVX_B0B8QV3MS2_4 burner Gas Grill_User Man_V1_EN_BK.indb 11 PR-KMY0YMPZVX_B0B8QV3MS2_4 burner Gas Grill_User Man_V1_EN_BK.indb 11
(ignite), and at the same time, press and hold the electronic ignition
(ignite). The burner should ignite immediately.
EN
11
10/10/2022 3:16:04 PM 10/10/2022 3:16:04 PM