Saving, Displaying And Deleting Measured Values; Error Messages/Troubleshooting - Beurer SR BM 2 Manual De Instrucciones

persists even after repeated periods of rest. The accuracy of
the resting blood pressure results is reduced in these users.
Like any medical measurement method, the precision of the
HSD diagnosis is limited and can lead to incorrect results in
some cases. The blood pressure measurements taken when
the circulatory system was at rest represent particularly
reliable results.
7. Saving, displaying and deleting measured
values
The results of every successful measurement are stored
together with the date and time. If there are more than 30
measurements, the oldest measurements are lost.
• Press the memory button M. Select the desired user
memory ( ... ) by pressing the memory button M again.
• If you press the function button +, the average value of
all the stored measured values in the user memory will be
displayed. If you press the function button + again, the
average value of the morning measurements for the last
7 days will be displayed (morning: 5 a.m. – 9 a.m., display
). If you press the function button + again, the average
value of the evening measurements for the last 7 days will
be displayed (evening: 6 p.m. – 8 p.m., display
continue to press the function button +, the most recent
individual measured values are displayed in turn with the
date and time.
• To switch off, press the START/STOP button
• If you forget to switch off the device, it will switch itself off
automatically after 30 seconds.
• If you want to delete the whole memory for a specific
user, press the memory button M. Press and hold down
the memory button M and the setting button SET simulta-
neously for 5 seconds.

8. Error messages/troubleshooting

In the event of errors, the error message _ appears on the
screen.
Error messages may appear if:
• It was not possible to correctly record the pulse:
• No measurement could be taken:
• The cuff is fastened too tightly or loosely:
• Errors occur during the measurement:
• The pump pressure is higher than 300 mmHg:
• There is a system error. If this error message appears,
please contact Customer Services:
• The batteries are almost empty:
In the above cases, you must repeat the measurement.
Make sure that the cuff tube is properly inserted and that
). If you
you do not move or talk.
Re-insert the batteries if necessary, or else replace them.
32
.
;
1
;
2
;
3
;
4
;
5
.
6
.