Connecting To Video Equipment - Eiki EIP-2500 Manual Del Propietário

Connecting to Video Equipment

The projector is equipped with input terminals that support component, S-video, and video signals.
See the illustration below to connect with the audio-visual equipment.
The image quality is highest in the order of the component signal, the S-video signal and the video
signal. If your audio-visual equipment has a component output terminal, use the COMPUTER/
COMPONENT terminal (INPUT1 or INPUT 2) on the projector for video connection.
When using a 3 RCA (Component) to 15-pin
D-sub cable (INPUT1 or INPUT2)
To audio output terminal
To component output (Y, C
ø3.5 mm minijack to RCA
audio cable (commercially
available)
When using an S-video cable (INPUT3)
To S-video
output terminal
To audio output
terminal
RCA audio cable (com-
mercially available)
24
EIP-2500_EN_PR_g
/P , C /P
B B R R
DVD, etc.
3 RCA (Component)
to 15-pin D-sub cable
DVD, etc.
S-video cable
(commercially available)
24
Supplied
accessory
) terminal
To INPUT1
terminal
To INPUT3
terminal
05.7.5, 1:24 PM
3 RCA
(Component)
to 15-pin
D-sub cable
To AUDIO
(INPUT1, 2)
terminal
To AUDIO
(INPUT3, 4)
terminal
L
R