button twice. All 3 white temperature LED lights will flash twice to indicate that the
temperature lock has been deactivated and the temperature setting can be adjusted.
•
WARNING: Always place the appliance in the unplugged charging base provided, on a
flat, heat-resistant surface or in the heat proof sleeve when not in use.
•
Working with one section at a time, slowly and steadily run the straightener over the
entire length of the hair from roots to ends. Use a comb to section your hair evenly for
more polished results.
•
Repeat this process all over the head. Remember to allow the hair to cool before
combing or brushing through.
•
IMPORTANT: Avoid using the straightener close to your face, ears or neck.
•
After using the straightener, switch it off and place it on the product stand or a heat
resistant surface and allow to cool before storing it. REVAMP recommends locking the
device by activating Smart Flight Safe Mode (Feature 7) prior to storing. The Smart
Flight Safe Mode (Feature 7) is locked when the white LED light is not visible.
•
For ease of storage, you can use the heat-proof sleeve (Feature 8) to ensure your
straightener plates stay closed.
•
Please note: When the product runs out of battery, it will turn itself off with an audible
"beep" signal.
•
IMPORTANT! This appliance must be store out of reach of children. Children shall not
play with the appliance
Follow us on www.revamphair.com for the latest hair tips and advice.
BATTERY STATUS INDICATOR
The battery status indicator LED will change in appearance depending on the amount of
battery available whilst using the product.
•
Static green light = 100%-20%
•
Flashing green light = Below 20%
When running low, the battery LED light becomes red in colour and flashes until the
battery runs out of charge completely.
When charging, the battery LED light is green in colour and flashes steadily.
When your straightener is fully charged, the battery LED light is green in colour and
remains stable.
Please note:
•
Regular use of styling products may cause the surface coating to deteriorate over
time.
•
Do not scratch the surface of the product as this will impact the effectiveness of the
coating.
•
While heating, during use and cooling, place on the product stand or on a heat
resistant surface. Only hold the product by the handle.
•
The product reaches a very high temperature during operation. Please style with
caution while in use and keep it away from the scalp and skin to avoid burns.
AUTO SHUT-OFF
This appliance has an automatic shut-off feature for added safety. If the appliance is
not being used, it will turn itself off after 15 minutes. If you wish to continue using the
appliance after this time, press the power button to switch on. Use the power button to
select your desired temperature.
This feature should not be considered as a substitute for 'OFF'. ALWAYS REMEMBER TO
SWITCH THE APPLIANCE OFF.