Hang the intake grille on the panel, and then connect
the lead connectors of the louver motor and the
control box on the panel to the corresponding
connectors of the main body.
Install cover rope
Panel hook
Re-installed into the style grid.
Reinstall the installation cover.
Fix the installation cover plate rope to the pillar of
the installation cover plate, and gently press the
installation cover plate into the panel.
NOTE: After installation, the butt plugs of
display, swing, water pump and other wire
bodies must be placed in the electric control
box.
Bolt
When installing the
cover, slide the four
slide fasteners into
the corresponding
slots on the panel.
96