Installation; Safety Requirements In The Installation Phase - Mectron starlight pro Manual De Uso Y Mantenimiento

4

INSTALLATION

The device must be installed in a suitable place that is convenient for its use.
WARNING: The place where the device is installed must meet the requirements found in
the Chapter 4.1 on page 9
4.1 Safety Requirements in the Installation Phase
! WARNING: The electrical system of the premises in which the device is installed and used
must comply with the rules in force and the relevant requirements of electrical safety.
! WARNING: Risk of explosion. The device cannot operate in environments where there are
saturated atmospheres of flammable gases (aesthetic mixtures, oxygen, etc.).
! WARNING: Install the device in a safe place protected from impact or accidental water or
liquid spray.
! WARNING: Do not install the device above or near sources of heat. Arrange during
installation for a suitable circulation of air around the device.
! WARNING: Do not introduce metal objects or the fingers into the handpiece housing in
the charging unit (Figure 5 at page 10 - Ref. B) when the device is on.
CAUTION: The device can be transported but must be handled with care when moved.
CAUTION: Do not expose the device to direct sunlight or sources of UV light.
CAUTION: Place the device in such a way as to always have the power plug easily
accessible as it is considered to be a disconnection device.
.
INStALLAtION
9