Descargar Imprimir esta página

Cleaning And Disinfecting The Handpiece - Mectron starlight pro Manual De Uso Y Mantenimiento

Ocultar thumbs Ver también para starlight pro:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

starlight pro
CAUTION: Water-based disinfectants with a neutral pH are strongly recommended. Some
alcohol based disinfectant solutions may be harmful and cause damage to plastic materials. Do
not use as disinfecting agents:
• Very alkaline products (pH > 9);
• Products containing sodium hypochlorite;
• Products containing hydrogen peroxide;
• Products containing abrasive substances;
• Acetone;
• Methylethylketone.
as they can discolour and/or damage the plastic materials.
3.
Dry the charging unit with a clean, nonabrasive cloth with low fibre-release before
reconnecting the charging unit to the power supply. Above all, make sure that the
electric contacts are completely dry.
7.2
Cleaning and Disinfecting the Handpiece
! WARNING: The handpiece is not protected against the entry of liquids.
! WARNING: Do not short-circuit the electric contacts of the handpiece with metal
objects or liquids.
! WARNING: The handpiece should not be sterilised.
! WARNING: Do not spray liquids directly onto its surface and onto the electrical contacts of
the charging unit.
After each treatment, proceed as follows:
1.
remove the optical fibre and optical protection from the handpiece;
2.
Clean the surface of the handpiece with a clean, soft cloth with low fibre-release,
moistened with a detergent solution (pH 6-9) and, if need be, disinfect with a non-
aggressive disinfectant solution with neutral pH (pH 7), following the instructions
provided by the manufacturer of the solution.
CAUTION: Water-based disinfectants with a neutral pH are strongly recommended. Some
alcohol based disinfectant solutions may be harmful and cause damage to plastic materials. Do
not use as disinfecting agents:
• Very alkaline products (pH > 9);
• Products containing sodium hypochlorite;
• Products containing hydrogen peroxide;
• Products containing abrasive substances;
• Acetone;
• Methylethylketone.
as they can discolour and/or damage the plastic materials.
20

Publicidad

loading