Problem
The green battery LED
does not light up when the
handpiece is placed back on
the charging unit.
Table 5 – Troubleshooting
11
TECHNICAL SPECIFICATIONS
Device compliant with Regulation (EU)
2017/745
Classification under the IEC/EN 60601-1
Essential performances
Charging station
Charging station power supply
Handpiece power supply
Handpiece for intermittent operation
Light source
Optical fibre
tECHNICAL SPECIFICAtIONS
Possible Cause
Battery not sufficiently low.
Class I
II
Applied part type B (Optical Fibre)
IP 20 (Charging unit)
IP 20 (Handpiece)
According to IEC 80601-2-60 Standard,
the device does not provide essential
performances.
Model starlight pro -CHArGEr
100-230 V~ 50/60 Hz 15 VA
Rechargeable Lithium-ion battery.
Manufacturer: Panasonic
Model: NCR-18500
Nominal Voltage: 3,6 V
Nominal capacity (Typical): 2000 mAh
60" ON 60" OFF - Max 3 consecutive cycles
High power LED with optic.
Dominant wavelength: 440 - 465 nm
LED in Class 2 (IEC 62471) retinal risk from
blue light or thermal retinal risk.
Diameter 8 mm.
Composition: Drawn coherent fibres
surfused with quartz.
Autoclave sterilisable (max. temp. 135 °C
for 20 minutes - max. 500 cycles).
Solution
See Table 1 at page 11
25