ECOVACS AIRBOT Z1 Manual De Instrucciones página 17

Remove Protective Materials of Charging Dock
8
Open the Back Cover and Adjust the Length of Power Cord
9
2
10 Place Charging Dock
Place the Charging Dock on a level oor surface against a wall with the
base perpendicular to the ground. Keep the immediate area 1.5m / 5' in
front of and 0.5m/1.6' on both sides clear of objects and re ective surfaces.
Charging Dock Bottom
1
Charge AIRBOT
Place AIRBOT near the Charging Dock. Press and hold
panel for 3 seconds. AIRBOT will return to charge automatically.
when charging starts. glows solid WHITE when AIRBOT is fully charged.
appears when the battery is low.
Note:
* Before charging AIRBOT, please power it ON.
* Charge AIRBOT for a minimum of 4 hours before the rst use.
Power the Air Quality Monitor
1. Choose the room to monitor and connect Air Quality Monitor to a
home USB port (Rated Input: 5V
Note:
* The Air Quality Monitor might not be able to be powered via computer
USB ports.
* Please place Air Quality Monitor vertically, and avoid placing it
against the wall.
2. After the USB connection is completed, Air Quality Monitor starts to
monitor the air quality.
on the control
ashes
4
1A) with the USB cable.
17
EN