• DO NOT use this air styler to dry a wig (or brush) made of something that may burn easily.
• DO NOT use this air styler to dry a wig (or brush) that has been cleaned in something that
may burn if it may still have some of the cleaner on or in it.
KEEP AWAY FROM CHILDREN
SAVE THESE INSTRUCTIONS
• This appliance is equipped with an automatic thermal limiter, which will cycle off when
overheated and come back on when cooled down. If the unit cycles off, unplug the cord for
several minutes before restarting.
• This appliance features a polarized plug with one blade wider than the other. As a safety
feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to
defeat this safety feature.
ALCI Safety Device
This appliance is provided with an appliance leakage circuit interrupter (ALCI) safety device built into
the plug. This device is designed to make the unit inoperable under some abnormal conditions, such
as accidental immersion in water. The ALCI safety device is equipped with a test button so that its
operation can be checked. This unit should be tested before each use to confirm that the safety
device is operational.
To test:
After plugging in your air styler:
1. Press the reset button on the ALCI device.
2. Press the test button. The reset button will pop out. This verifies that the safety
device is operating properly.
3. Press the reset button to reactivate your ALCI safety device.
4. Your air styler is now ready for use.
This unit may automatically trip when unplugged. If so, the unit must be reset after it is plugged in.
If the air styler doesn't reset after following the above testing procedure, contact the manufacturer.
Should the ALCI safety device trip (i.e., reset button pops out) during use, press the reset button. Should
the air styler fail to reset, contact the manufacturer. Never operate this appliance if it has been dropped
in water.
3 / EN