Descargar Imprimir esta página

Cleaning & Maintenance - REVAMP Professional PROGLOSS AIRSTYLE Manual De Instrucciones E Información Sobre La Garantia

Ocultar thumbs Ver también para PROGLOSS AIRSTYLE:

Publicidad

Idiomas disponibles

Idiomas disponibles

To use the Cool Shot press and hold the button at the front of the air styler. This will cool the hair
and help to set the style.
After use, switch off the air styler, by switching the speed setting to 0FF, unplug and allow to cool
before storing away.
Follow us on (US) https://us.revamphair.com/ and (CAN) www.revamphair.ca for the latest hair tips
and advice.
CLEANING & MAINTENANCE
Switch the appliance off, unplug from the mains and allow to cool fully before cleaning.
Wipe over all surfaces using a soft damp cloth. Do not use harsh abrasives or cleaners.
Do not immerse the appliance in water or and other liquid.
Ensure all parts are dried thoroughly with a soft towel before reusing.
To prevent cord damage, do not wrap the cord around the appliance, always store the cord loosely
next to the appliance.
Store in a cool dry place.
Cleaning the Filter (feature 7)
To maintain peak product performance and to prolong motor life, it is important to regularly remove
dust and dirt from the rear grille and clean.
Open the rear-grille cover.
Clean with a soft brush and close rear-grille cover.
DO NOT USE APPLIANCE WITHOUT THE FILTER IN PLACE
Smooth & shape cushion paddle air brush (feature 11)
Press the "clean release" button to open and clean the inside of the brush in order to maintain the
performance of the product.
STORAGE
When not in use, unplug the unit. Allow it to cool, and store out of reach of children in a dry location.
NEVER wrap the cord around the appliance, as this will cause the cord to wear prematurely and break.
Handle cord carefully, and avoid jerking, twisting, or straining it, especially at plug connections.
SPEED
0FF
Off
I
Medium speed
II
High speed
HEAT
Low heat
Medium heat
High heat (for faster drying)
6 / EN

Publicidad

loading

Este manual también es adecuado para:

Dr-1250