Descargar Imprimir esta página

Using The Device - Bluewheel IX250 Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

SHORT CHECKS
Pull left brake lever (disc brake at front wheel) and push scooter: The front wheel should block.
Otherwise, do not use the scooter, but contact customer service.
Check that steering column is locked and all connections of the scooter are firmly fastened.
RIGHT BEFORE THE RIDE:
Put one foot close to the front of the scooter, the other foot on the ground.
Press Power button until the display switches on.
Check battery status: Charged clearly above 15%? More than 1 bar
in the charge display is lit?) If not, switch off and recharge, please!
If necessary, switch on the lights: Press Power button shortly.
DRIVING OFF:
Lean slightly forward. Hold both handles.
Push off with foot until scooter rolls. Carefully press speed lever.
Press lever until a safe speed is reached.
Put the other foot onto the sooter; turn it slightly outwards.
REAR BRAKE CHECK (Motor brake)
Pull right brake lever while riding: Scooter must decelerate and stop.
Otherwise, do not use the scooter, but contact customer service.
DRIVING...
Always choose appropriately low speed.
Observe surroundings. Be ready to brake.
Always drive according to the current abilities.
As a beginner, drive with clearly reduced maximum speed.
Drive curves carefully and with even speed.
For driving, observe all safety advices, traffic rules and other advices.
Always watch battery status. If rest charging is 15 % or less, stop and switch off.
...AND STOPPING:
For braking, first apply the motor brake (right brake lever).
If necessary, carefully additionally brake with the left lever (for front wheel).
Avoid abrupt braking.
While braking, do not lean forward onto the handle bar, but slightly backwards.
Avoid braking in curves.

6. USING THE DEVICE

21
EN
15%

Publicidad

loading