Publicidad
Idiomas disponibles
Idiomas disponibles
5.3 Installing the wall mount bracket
Item
Description
1
Wall bracket
2
Exhaust port
1. Fasten the wall mount bracket for the cantilever arm and the wall
mount bracket with air intake opening with corresponding screws and
dowels to load-bearing wall or column.
NOTE
Observe the recommended mounting material in this manual.
2. Use the provided mounting holes of the wall mount brackets.
3. Align the wall mount bracket with a spirit level.
4. If necessary, use washers between the wall mount bracket and the
surface to compensate any unevenness.
1502760-03
Fig. 19: Wall bracket
Item
3,4,5,6
Tab. 21: Positions on the product
- 57 -
Description
Mounting holes
EN
Publicidad
