Publicidad
Idiomas disponibles
Idiomas disponibles
5.8.2 Control Box - Retrofit Transformer
Pos.
Description
D
Control box
11
Transformer
1. Switch off the control box (Pos. D) and disconnect it from the mains.
2. Open the control box (Pos. D) by removing the cover plate.
3. Attach the transformer (Pos. 11) to the base plate of the control box (Pos.
D). Use the enclosed fixing material for this purpose.
4. Insert the connector plug (Pos. 11) into the connection socket (Pos. 12).
5. Close the control box (Pos. D) again with the cover plate.
6. Connect the control box (Pos. D) to the mains and put it back into
operation.
1502760-03
Fig. 28: Control Box - Retrofit Transformer
Tab. 30: Positions on the product
- 67 -
Pos.
Description
12
Connector plug
13
Connection socket
EN
Publicidad
