Publicidad
Idiomas disponibles
Idiomas disponibles
ATTENTION
The maximum weight of 50 kg on the cantilever arm must not be
exceeded.
Item
Description
1
Screw
6. After the assembly of the entire extraction arm, it might be necessary to
adjust the brake on the wall mount bracket of the cantilever arm, so it
hold itself up in any position. For this purpose, the braking action can be
adjusted by loosening/tightening the screw.
5.8 Mounting the extraction hood with lighting - optional
The following chapters describe the assembly and cable routing of the
extraction hood with lighting.
NOTE
Before starting installation, check the existing product variant to
determine the cable routing. See next chapters.
1502760-03
Fig. 26: Cantilever arm brake
Item
2
Tab. 27: Positions on the product
- 64 -
Description
Brake
EN
Publicidad
