Fanimation GLIDEAIRE FPD8520 Serie Manual De Instrucciones página 13

How to Wire Your Ceiling Fan (Continued)
3. Connect wires using connectors as shown in
Figure 4.
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors. Do not operate fan until the blades are in
place. Noise and motor damage could result.
L BLACK
N
WHITE
AC
L1
RED
POWER
4. After connections have been made, put the
white and green leads to one side and the black
leads towards the other side, the connection
should be turned upward and carefully push leads
into the outlet box. The wires should be spread
apart with the grounded conductor and the
equipment-grounding conductor on one side of
the outlet box and the ungrounded conductor on
the other side. (Figure 5)
WARNING
The blades must be installed first before programming
is performed.
CAUTION: INCORRECT WIRE CONNECTION
COULD DAMAGE THIS RECEIVER.
HANGER
BRACKET
HANGER
BALL
BLACK
WHITE
Receiver
BLACK
ANTENNA
Figure 4
Green Wire
from Hanger
Bracket (Ground)
Green Wire
from Receiver (2)
(Ground)
13
RECEIVER HARDWARE USED:
Wire Connectors
GROUND
RED
GRAY
YELLOW
Green Wire
White Wire
from Supply
from Supply
(Ground)
White Wire
from Receiver
Receiver
Green Wire
from Hanger
Ball (Ground)
Figure 5
X 7
RED
GRAY
YELLOW
DC MOTOR
Listed Outlet Box
Black Wire
from Supply
Household
Supply
Red Wire
from Supply
Black Wire
from Receiver