Fanimation GLIDEAIRE FPD8520 Serie Manual De Instrucciones página 7

How to Assemble Your Ceiling Fan Blades
1. Slide blades through slots in motor housing and
attach to the motor hub using the #8-32 serrated
head screws and flat washers. Make sure the screws
securing the blades to the motor hub are tight and are
properly seated. (Figure 1)
NOTE:
Periodically check blade hardware and
resecure if necessary.
!
To reduce the risk of personal injury, do not bend the
blade when installing, balancing the blades or
cleaning the fan. Do not insert foreign objects in
between the rotating blades.
Remove the two set screws and locking nuts in the
2.
downrod support of the motor assembly and retain
for reinstallation in Step 4 of the How to Assemble
Your Ceiling Fan section, Page 8. Remove the six
screws at the top of the motor assembly and retain
them for next step. (Figure 2)
Assemble the upper housing to the motor assembly
3.
using the previously removed screws. (Figure 3)
WARNING
Motor Assembly
HARDWARE USED:
#8-32
SERREATED HEAD
SCREWS
FLAT WASHERS
Motor Assembly
Upper Housing
Motor
Assembly
7
#8-32 Serrated Head
Screw with Flat Washer
(3 per assembly)
Figure 1
x 9
x 9
Set Screws and
Locking Nuts (2)
Figure 2
Figure 3
Blade