Stokke Sleepi Manual Del Usuario página 72

rées ou manquantes, des joints dessérés, des pièces
brisées ou avec un tissu/filet déchiré. Vérifier l'état au
moment de l'assemblage et régulièrement pendant la
péiode d'utilisation. Contacter Stokke LLC pour obtenir
des pièces de rechange. Ne jamais substituer de pièces.
• L'enfant peut s'étrangler avec les cordons ! Ne jamais
placer d'objets avec une corde autour du cou de votre
enfant, comme une capuche à cordons. Ne jamais
suspendre de ficelles au-dessus du produit ni attacher
de cordes autour des jouets.
• Le berceau, y compris les côtés du lit doit être entiè-
rement monté avant d'être utilisé.
• L'enfant peut rester coincé et mourir lorsqu'un filet
improvisé ou des couvertures sont placées sur le pro-
duit. Ne jamais utiliser un de ces objets pour contenir
l'enfant dans le produit.
• Lorsque l'enfant est capable de se mettre en position
debout, régler le matelas/la base à la position la plus
basse et retirer les coussinets de protection, les grands
jouets et autres objets qui pourraient servir de marches
pour sortir.
• Fournir toujours l'encadrement nécessaire pour as-
surer la sécurité continue de votre enfant. Lorsque
le produit sert pour jouer, ne jamais laisser l'enfant
sans surveillance.
• Ne jamais placer le produit près d'une fenêtre où les
cordons des stores ou des champs peuvent étrangler
un enfant.
• Ce matelas est conçu pour le lit Stokke® Sleepi™, numé-
ro de modèle : 600301 qui a des dimensions internes
maximales de 1361 × 692 mm.
• Taille du matelas : 53,54 × 26,77 × 3,15 po. /
1 350 × 698 × 80 mm"
72 | Stokke® Sleepi™
AU/NZ
IMPORTANT, RETAIN FOR
FUTURE REFERENCE.
READ CAREFULLY!
Safe Sleep
• As soon as your baby comes home, she/he will need a safe
place to sleep. Pediatrics recommends that babies sleep in their
parents' room (but not the same bed) for the first six months or,
ideally, for the first year. Having a sturdy, secure crib or bassinet
for baby is essential.
• To reduce the risk of SIDS (Sudden Infant Death Syndrome),
pediatricians recommend healthy infants be placed on their
backs to sleep, unless otherwise advised by your physician, a
firm mattress with a tight-fitting sheet will be needed as well.
• Keep soft objects and loose bedding away from the infant's
sleep area to reduce the risk of SIDS, suffocation, entrapment,
and strangulation.
Stokke recommends following The American Academy of Pediatrics
recommandations for safe infant sleeping environments: www.
healthychildren.org
Cleaning and maintenance
Stokke® Sleepi™ Mattress (sold separately):
• MATTRESS COVER: Washable at 60°C / 140°F. Stretch while
wet. Do not tumble dry. Dry flat.
• Mattress core: Rinse mattress core with warm water and dry
flat. If your child has an accident, the mattress cover and core
should always be washed.
WOOD:
• Wipe with a clean, damp cloth, wipe off excess water. Stokke
does not recommend any use of detergents. The colour of the
wood may change if exposed to sun.
NORMAL USE:
• Always remove the duvet in the morning and let the bed and
duvet "cool down" and dry up.
• Possible strangulation or entanglement hazard. Never use crib
mattress cover unless it fits securely on crib mattress and wraps
around the mattress corners.
• This mattress may not soak up vomit.
WARNING!
Stokke® Sleepi™ Mini
• WARNING – Stop using the product (Mini) as soon as
the child can sit or kneel or pull itself up.
• Do not let other children play unsupervised near the Mini.
• Make sure the wheels on the Mini is in locked position
when a child is in it..
Stokke® Sleepi™ Bed
• The mattress base can be adjusted to two different
positions. Ensure the distance from the mattress to the
top of the bed is always at least 30 cm in the highest
position and at least 50 cm in the lowest position. This
level is marked at the cot end ( ). An original mattress
from Stokke ensures a high quality fit.
• The lowest position is the safest and that the base
should always be used in that position as soon as the
baby is old enough to sit up;
• Make sure to keep medication, string, elastic, small
toys or small items such as money out of reach from
any position in the cot.
• To prevent injuries from falls when your child can climb
in and out of the bed by itself, you shall no longer use
the Sleepi™ Bed as a cot. When your child is ready,
you may remove one side of the cot and adjust the
mattress base to the lowest position. Once the cot side
is removed, ensure to also disassemble the wheels.
WARNING!
TO PREVENT FALLS,
THE MATTRESS BASE OF
THIS COT SHOULD BE AD-
JUSTED TO THE LOWEST
POSITION BEFORE THE
CHILD CAN SIT UP.
Recommended mattress size
This product has been manufactured for use with a
mattress which measures 698 mm wide by 1364 mm
long and 84 mm in thickness for Stokke® Sleepi™
Bed and 590 mm wide by 764 mm long and 84 mm
in thickness for Stokke® Sleepi™ Mini, and have the
shape of the Bed/Mini. The width and length is spec-
ified because it is important that the gaps between
the mattress and the sides and ends of the cot will not
exceed 30 mm. This is to minimize the risk of a child
getting entrapped between the side and the mattress.
The thickness of the mattress is specific to ensure that
the depth of the cot is greater than 500 mm with the
mattress base in the lowest position to minimize the
risk of a child climbing or falling out of the product.
Information about your new Stokke® Sleepi™
Mini Mattress and Stokke® Sleepi™ Bed Mattress
(sold separately)
• Make sure the single mesh side of the mattress is facing
downwards
WARNING!
• Do not use this product without reading the instruc-
tions for use first.
• Read these instructions carefully and follow them in
detail to ensure that the safety features of the Mini
and Bed is not compromised.
• Keep the instructions for later use. Save the hex key
for later use. Re-tighten all screws 2-3 weeks after
assembly, and re-tighten regularly.
• When assembling the product, do not tighten the
screws until the whole unit is assembled. Doing this
ensures you the easiest way to assemble.
• Make sure the Stokke® Sleepi™ is placed on a level and
stable surface. After assembly, re-check and tighten
WARNING