Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
4.4
Lift System
The Lift System is designed to assist in retrieving
the robot from the pool. Lift System can be
activated at any time during or after a cleaning
cycle.
1.
Press
to begin the automated
procedure.
The screen displays
Lift System is in operation.
NOTE: To stop the procedure at any time, press and
release the button again.
2.
Next, Press and HOLD
the cleaner.
3.
Once the cleaner is facing the wall of your
choice for retrieval, release the button.
4.
Cleaner will drive forward and up the wall it
is facing. It will wait at the water line to be
retrieved.
5.
When in reach, remove the cleaner from the
pool using the handle. The cleaner will quickly
expel water to allow for lighter, easier removal.
NOTE: Never lift the cleaner out of the pool by the
floating cable.
Page 10
Section 5. Installing iAquaLink
The iAquaLink app is available for download from
the App Store or Google Play.
With iAquaLink Control, you can connect to
when the
your robotic cleaner from anywhere, anytime to
access functions and troubleshooting advice.
App features are dependent on model.
Before you begin installation, make sure you
have the following:
to rotate
• IMPORTANT: Have your Wi-Fi network
• Robotic cleaner is submerged in the pool
• Control box is connected and plugged into a
• Smart device (phone or tablet) with Wi-Fi and
• Wi-Fi router with sufficient signal strength at
5.1
Install or update the iAquaLink app from the App
Store or Google Play.
5.2
Open the iAquaLink app, then Sign Up or Log In.
Complete all required fields in the Account Setup
page and agree to the Terms and Conditions.
Polaris
Robotic Pool Cleaner | Owner's Manual
®
password available
GFCI outlet
Bluetooth
enabled
®
the control box
Download the App
Sign Up and Log In
®
Publicidad
