Bemer Therapy System Evo Instrucciones De Uso página 36

z Choose the application module.
z Select port A1/A2.
z Connect the applicator or the application module (see chapter 7.3).
z Select the appropriate program (see chapter 6).
8.3.1 Intensity mode
After selecting the "Intensity" therapy type, you can choose between three different
intensity levels and then start a therapy.
A1 B.Body A2 B.Pad
Intensity – Select intensity
1 2 3
LOW MEDIUM HIGH
8 Minutes 8 Minutes 8 Minutes
A1 A2
BACK
Choose the intensity level for the
connected applicator
z Press <Intensity>.
z If necessary, switch the connected port to A1/A2.
z Select the intensity level. 1 - 3
Intensity – <Intensity level> opens.
The time sequence for the therapy is shown.
The connected application module is shown.
A1 B.Body A2 B.Pad
Intensity – Low –
HIGH
MEDIUM
LOW
08:00
1 2 3 4 5 6 7 8
A1 A2
BACK START
PLUS MUSIC
User interface for the -Low- intensity mode with
"Plus" and "Music" controls
21:13
21:13
70
Before starting the treatment:
z Select <plus Signal> on/off.
z Select <Music> on/off.
z Press <Start> to start the therapy.
z Press <Stop> to end the therapy prematurely.
8.3.2 Program mode
After selecting the "Program" therapy type, you can choose between three different intensity levels
and then start the therapy. The three different programs differ in terms of the treatment duration
and intensity.
A1 B.Body A2 B.Pad
Programs – Program selection
1 2 3
P1 P2 P3
8 Minutes 16 Minutes 20 Minutes
EXPERT
A1 A2
BACK
MODE
Select program P1, P2 or P3
z Press <Programs>.
z If necessary, switch the connected port to A1/A2.
z Select the program level. 1 - 3
Program selection – <Program name> opens.
The time sequence for the therapy and the intensity is shown.
The connected application module is shown.
A1 B.Body A2 B.Pad
Programs – P1 –
HIGH
MEDIUM
LOW
08:00
2 4 6 8 10 12 14 16 18 20
A1 A2
BACK START
PLUS MUSIC
Overview of the program sequence
ES NL IT FR
21:13
21:13
71
DE EN