Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
The food processor shuts
off during operation
The motor slowed down
during operation
The food processor
vibrates / moves
during processing
INSERT PUSHER flashing
EASY SOLUTION
•
The lid may have become unlocked; check to make sure it is securely
in position.
•
If the motor overloads, the 'OVERLOAD PROTECTION' icon in the screen
will start to flash. Switch off by pressing the POWER button and unplug
the power cord. Allow the food processor to cool for 30 minutes before
resuming.
•
This is normal as some heavier loads (e.g. slicing / shredding cheese) may
require the motor to work harder. Reposition the food in the feed chute
and cut the food into smaller sizes and process using a smaller pusher and
continue processing.
•
The maximum load capacity may have been exceeded. Remove some of the
ingredients and continue processing.
•
Make sure the rubber feet at the bottom of the unit are clean and dry.
Also make sure that the maximum load capacity is not being exceeded.
•
This is normal as some heavier loads may require the motor to work harder.
•
Turn the unit off and clear any ingredients that may be caught on the disk,
before continuing.
•
If this occurs while mixing dough – then turn unit off and redistribute the
dough mixture more evenly around the bowl before continuing.
•
Process hard and fibrous foods such as carrots, through the medium or
small chute.
•
Make sure that food does not exceed the max line in the food chute.
•
If pusher is fully inserted and this warning flashes on the screen, check that
the bowl and lid are assembled correctly. Bowl handle should be facing the
front of the unit.
EN
19
Publicidad
