Descargar Imprimir esta página

Stihl RE 100.0 PLUS CONTROL Manual De Instrucciones página 41

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 46
13 Storing
► Empty or secure the detergent container so
that it cannot topple over, fall down and cannot
move.
Carrying or pulling the high-pressure washer
1
► Pull the high-pressure washer using handle
(1).
► Carry the pressure washer by the handle (1)
and the carrying handle (2).
Transporting the high-pressure washer in a vehi‐
cle
► Secure the high-pressure washer so that it
cannot turn over or move.
► If the high-pressure washer cannot be trans‐
ported in a frost-proof environment: Protect
the high-pressure washer using antifreeze.
13 Storing
13.1
Storing the pressure washer
► Switch off pressure washer and unplug mains
plug from the socket.
► The pressure washer should be stored in such
a way that the following conditions are fulfilled:
– The pressure washer is out of the reach of
children.
– The pressure washer is clean and dry.
– The pressure washer is in an enclosed
room.
– The pressure washer is in a temperature
range above 0 °C.
– If the pressure washer cannot be protected
from frost in storage: Protect the pressure
washer with antifreeze.
14 Cleaning
14.1
Rinsing the High-pressure
Washer
If you used detergents:
► Remove and drain detergent bottle.
► Dispose of detergent residue as specified in
the detergent user manual.
► Rinse the detergent bottle with clean water.
► Insert the detergent bottle.
0458-004-9821-B
2
1
► Rotate the 3-in-1 nozzle into position
set the highest power level.
► Switch on the high-pressure washer and rinse
with clean water for approximately 30 sec‐
onds.
14.2
Cleaning the high-pressure
washer and accessories
► Switch off the high-pressure washer and pull
the mains plug out of the socket.
► Clean the high-pressure washer, high-pres‐
sure hose, spray gun and accessories with a
damp cloth.
► Clean the connectors and couplings on the
high-pressure washer, high-pressure hose and
spray gun with a damp cloth.
► Clean vents with a paintbrush.
14.3
Cleaning nozzle and spray
lance
► Rinse the nozzle and spray lance under run‐
ning water and dry with a cloth.
► If the nozzle is clogged: Clean the nozzle with
the cleaning pin.
English
and
41

Publicidad

loading