Publicidad
Idiomas disponibles
Idiomas disponibles
6) SCAN TYPE
Allows to select the TYPE of SCAN.
Press F key (8).
is displayed.
Long press F key (8) to enter the MENU.
1.
Turn the rotary CH knob (4) or use UP/DN buttons (13) on the microphone
to select the
menu.
2.
Press EMG key (6) to validate. The current value blinks on the display.
3.
Turn the rotary CH knob (4) or use the UP/DN buttons (13) on the microphone
to select the scan type sq or t 1.
4.
Short press the EMG key (6) to validate. a) Return to the point 1 to set an-
other menu or b) Short press the F key (8) to validate and exit the MENU.
disappears from the display.
5.
If no key is pressed, the unit exits MENU after 10 seconds.
from the display.
"
"means scanning stops when busy channel is founded.
"t 1" means scanning stops when busy channel is founded and return to
scan after 5 seconds.
Type default value is : 59.
7) SCAN SKIP
This function allows to memorize/erase a channel form the SCAN SKIP
memory.
1.
Select a channel
2.
Press F key (8).
is displayed.
3.
Long press F key (8) to enter the MENU.
4.
Turn the rotary CH knob (4) or use UP/DN buttons (13) on the microphone
to select the
menu.
5.
Press EMG key (6) to validate. The current value blinks on the display.
6.
Turn the rotary CH knob (4) or use the UP/DN buttons (13) on the microphone
to alternate between On and OF.
7.
Short press the EMG key (6) to validate. a) Return to the point 1 to set an-
other menu or b) Short press the F key (8) to validate and exit the MENU.
disappears from the display.
8.
If no key is pressed, the unit exits MENU after 10 seconds.
from the display.
On memorize the current channel into the SCAN SKIP memory. When a
channel is stored in the memory,
channel number.
OF erase the current channel from the SCAN SKIP memory,
from the display.
See the § SKIP on page 9.
disappears
disappears
appears on the display close to the
disappears
8) PA SETTING
This function allows to select the operating mode of the Public Address.
Press F key (8).
is displayed.
Long press F key (8) to enter the MENU.
1.
Turn the rotary CH knob (4) or use UP/DN buttons (13) on the microphone
to select the
menu.
2.
Press EMG key (6) to validate. The current value blinks on the display.
3.
Turn the rotary CH knob (4) or use the UP/DN buttons (13) on the microphone
to select the operating mode of the PA : I n, OF or PA.
4.
Short press the EMG key (6) to validate. a) Return to the point 1 to set an-
other menu or b) Short press the F key (8) to validate and exit the MENU.
disappears from the display.
5.
If no key is pressed, the unit exits MENU after 10 seconds.
from the display.
I n: the modulation of the microphone is transmitted to the external loud-
speaker connected to jack PA.SP. (D). The received signal is transmitted to
the internal loudspeaker [or external optional loudspeaker connected to
jack EXT.SP (E)]. "PA" blinks alternately with the modulation mode (AM or FM).
OF: The reception is no more functional. Only the modulation of the micro-
phone is transmitted to the Public Address loudspeaker connected to jack
PA.SP. (D). PA and le level of the
PA: the modulation of the microphone and the received signal are trans-
mitted to the Public Address loudspeaker connected to jack PA.SP. (D).
"PA" blinks alternately with the modulation mode (AM or FM).
Turn the VOLUME knob (1) to adjust the audio level of the mode PA.
Default PA setting is I n.
See § PA (Public Address) page 8.
9) MICROPHONE TYPE
PRESIDENT HARRISON FCC can be used with both a PRESIDENT electret and
dynamic 6-pin microphone (see microphone wiring on page 68). When
the unit is turned on, the microphone type is displayed briefly.
Press F key (8).
is displayed.
Long press F key (8) to enter the MENU.
1.
Turn the rotary CH knob (4) or use UP/DN buttons (13) on the microphone
to select the
menu.
2.
Press EMG key (6) to validate. The current value blinks on the display.
3.
Turn the rotary CH knob (4) or use the UP/DN buttons (13) on the microphone
to select the microphone type EL (electret) or dy dynamic.
13
disappears
PA
are displayed.
Publicidad
