Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Short press the EMG key (6) to validate. a) Return to the point 1 to set an-
other menu or b) Short press the F key (8) to validate and exit the MENU.
disappears from the display.
5.
If no key is pressed, the unit exits MENU after 10 seconds.
from the display.
Microphone type default is EL (electret).
10) SWR CALIBRATION
This function allows you to adjust the SWR by beeping.
Press F key (8).
is displayed.
Long press F key (8) to enter the MENU.
1.
Turn the rotary CH knob (4) or use UP/DN buttons (13) on the microphone
to select the
menu.
2.
Press the EMG key (6) to confirm. The radio automatically switches to
mode without pressing the PTT switch (12) and calibration begins. Calibration
time is 5 minutes maximum. A countdown is done in the display.
3.
Adjust the antenna.
-
The beep* is continuous when the SWR value is 1. 0 . The space between the
beeps becomes larger and larger as the SWR value moves away from1. 0 .
-
The volume of the beep is adjustable with the VOL button (1).
-
The display shows the SWR value, for example 2. 5 .
4.
Press the PTT switch (12) to exit the SWR CALIBRATION.
*Check that the beep volume is set to a suitable level.
See ADJUSTMENT OF SWR page 6.
11) NRC SET
The NRC filter can be set independently in transmission ( ) as in reception
( ).
Press F key (8).
is displayed.
Long press F key (8) to enter the MENU.
1.
Turn the rotary CH knob (4) or use UP/DN buttons (13) on the microphone to
select the
menu. The last parameter used and its value appears
on the display.
2.
Press the EMG key (6) to confirm. The parameter blinks,
3.
Turn the rotary CH knob (4) or use the UP/DN buttons (13) on the microphone
to select
(reception) or
(transmission).
4.
Press the EMG key (6) to confirm. The value of the filter blinks.
5.
Turn the rotary CH knob (4) or use the UP/DN buttons (13) on the microphone
to change the value from 0 to 5.
6.
Short press the EMG key (6) to validate. a) Return to the point 1 to set an-
other menu or b) Short press the F key (8) to validate and exit the MENU.
disappears from the display.
The default value are 0 (transmision) and 0 (reception)
See the § NRC page 9 to activate/deactivate the function.
12) VOLUME ACCESSORY
disappears
This function allows you to control the volume of the unit and an accessory
plugged on the 6-pin plug (accessory available soon).
Press F key (8).
Long press F key (8) to enter the MENU.
1.
Turn the rotary CH knob (4) or use UP/DN buttons (13) on the microphone
to select the
2.
Press EMG key (6) to validate. The current value blinks on the display.
3.
Turn the rotary CH knob (4) or use the UP/DN buttons (13) on the microphone
to select 0,1 or 2.
4.
Short press the EMG key (6) to validate. a) Return to the point 1 to set an-
TX
other menu or b) Short press the F key (8) to validate and exit the MENU.
disappears from the display.
5.
If no key is pressed, the unit exits MENU after 10 seconds.
from the display.
0 - the volume knob (1) affects the internal speaker volume.
1 - the volume knob (1) affect the accessory volume
2 - the volume knob (1) affects both the internal speaker and accessory volume.
Default accessory volume is 0.
13) CODE SET
For simplicity, in this manual we will speak of CODE to indicate both a CTCSS
tone and a DCS code, of GENRE to indicate the kind of code (CTCSS, DCS
or OFF = no code). TYPE indicates whether this is a TX transmission or an RX
reception and MODE specifies the operating mode, Identical I d or different
DF. See § CTCSS/DCS page 10
This menu allows you to configure the operating mode of the CTCSS/DCS
function and to store the CTCSS/DCS codes.
2 operating modes:
-
I d means that the code used will be identical for transmission (TX) and for
or
.
reception (RX).
-
DF means that the user can use one code (or OFF = no code) for transmission
(TX) and another (or OFF = no code) for reception (RX).
Select the desired channel using the rotary CH knob (4) or the UP/DN buttons
(13) on the microphone.
Press F key (8).
Long press F key (8) to enter the MENU.
14
is displayed.
menu.
is displayed.
disappears
Publicidad
