KLS Martin group ANGULUS Instrucciones De Uso página 37

Instructions for Use
Angled Screwdriver ANGULUS
NOTICE
Risk of instrument failure
Never use different systems in combination!
Do not use the angled screwdriver in combination with systems from other manufacturers.
Note that using instruments not specifically intended for use with the angled screwdriver
poses a risk of instrument failure.
To drill a hole, simply replace the screwdriver bit with a drill bit.
•
The angled screwdriver can be operated both manually and mechanically. For the latter, a
micro motor with INTRA coupling can be plugged in place after removing the rotatable handle
part. The maximum speed is 5,000 rpm (revolutions per minute).
The transmission ratio is 1:3, which means that a drive or motor speed of 5,000 rpm
translates into a tool (e.g. drill) speed of 1,666 rpm.
6 Disassembly
To reassemble the screwdriver, proceed in reverse order.
Item Subsystem
2
Shank
3
Handle
4
Rotatable handle
5
Wrench
6
Drive shaft
7 Gear unit
8
Gear cap
9 Screwdriver bit or twist drill
V. 2.0 37