KLS Martin group ANGULUS Instrucciones De Uso página 39

Instructions for Use
Angled Screwdriver ANGULUS
6.3 Removing the Screwdriver Bit or Twist Drill
Push the long, cylindrical tip of the rotatable handle part into the head of the angled
•
screwdriver to loosen (unlock) the insert.
Thereafter, the screwdriver bit or drill bit can be simply pulled out.
•
6.4 Removing the Shank of the Angled Screwdriver
Rotate the lock nut clockwise (left-hand thread), then pull the shank off the handle. If
•
required, you can use the supplied flat spanner (5).
V. 2.0 39