KLS Martin group ANGULUS Instrucciones De Uso página 40

6.5 Removing the Drive Shaft
Pull the drive shaft out of the shank.
•
Assembly is carried out in reverse order.
6.6 Disassembly Instructions for the Angled Screwdriver Head
6.6.1 Removing the gear cap using the rotatable handle
Unscrew the cap using the short, square tip of the rotatable handle.
•
To remove the gear cap, you can also use a screwdriver with a Center Drive 2.0 mm bit
REF (Item no. 25-542-17-07).
40
Instructions for Use
Angled Screwdriver ANGULUS
V. 2.0