CAUTION
]
Handle tempered glass shelves carefully to avoid
personal injury or property damage., Shelves may
break suddenly if nicked, scratched, or exposed to
sudden temperature change.
o Remove shelves by lifting up shelf front, releasing
hooks from metal track, then pulling out
-
Replace shelves by inserting hooks into metal track
and lowering front of shell
B
A
C
A Shelf
C Hook
B Metal rack
Slide out shelves putt forward for easy access to items in
back..
Crisper
Drawers
Crisper drawers keep produce fresh longer,, Wrap produce
tightly. Do not wash produce before placing in crispers.,
Excess moisture could cause produce to spoil
prematurely Do not line crispers with paper towels Paper
towels retain moisture_
Crisper control is located below front shelf trim, Control
adjusts humidity in crisper drawers,, Slide control to high
for produce with leaves such as lettuce, spinach or
cabbage
Slide control to low for produce with skins such
as cauliflower, corn or tomatoes,.
Remove shelf and crisper drawers by completing the
following steps:
1_ Open left crisper
• For doors hinged on left. open right crisper,
CAUTION
I
Handle tempered glass shelves carefully to avoid
personal injury or property damage. Shelves may
break suddenly if nicked, scratched, or exposed to
sudden temperature change.
2.
Remove glass crisper top by gently pushing up
from underneath, Tilt one end up and pull out
A Glasscrispertop
3
Remove left crisper by lifting from front while
supporting underneath and pulling out. For doors
hinged on left, remove right crisper.
4
Remove support post at recess in bottom center of
Fresh Food section.
5.
Remove other crisper by sliding to opposite wall.
Lift from front while supporting underneath and pull
out°
6.
Replace crispers and shelf by performing steps 2-
5 in reverse order..
Adjustable
Position
Drawer
Adjustable position drawer provides space saving storage
underneath spillproofshetf and pulls forward for easy
access
-
Remove shelf by pulling forward until shelf stops
Push tabs on sides of shelf in and pull shelf forward..
•
Replace shelf by inserting shelf into track and sliding
back..
Meat Drawer
The meat drawer features a drawer inside a sleeve
Freezer air circulates between drawer and sleeve.. This
systems keeps food fresh longer and up to 5°F (3°C)
colder than refrigerator temperature
Some models feature a meat drawer control located
below front shelf trim Control adjusts amount of air
circulating around drawer. Slide control to COLD for
normal refrigerator temperature and to COLDER for colder
temperature.. Ice crystals may form on drawer or food on
COLDER setting. Cold air entering the meat drawer can
decrease refrigerator temperature
Refrigerator control
may need to be adjusted to a lower number to
compensate for colder air.
Meat drawer can be moved from the left to the right side
of the refrigerator compartment to accomodate different
storage needs To move drawer perform the following
steps:
I11
m