Clutch Lever; Shift Pedal; Brake Lever - Benelli TRK 502 Manual Del Propietário

Instrument and control functions

Clutch lever

The clutch lever is located on the left side of
the handlebar.
To disengage the clutch, pull the lever toward
the handlebar grip. To engage the clutch,
EN
release the lever. The lever should be pulled
rapidly and released slowly for smooth clutch
operation.
3
The clutch lever is equipped with a clutch swi-
tch, which is part of the ignition circuit cut-off
system. (See page 3-14).
3
1
2
The clutch lever is equipped with a position
adjustment knob.
1. Clutch lever
2. Distance between brake lever and throttle
grip
3. Brake lever position adjusting knob
4. "▲" mark
To adjust the distance between the clutch le-
ver and the knob, turn the knob clockwise or
counterclockwise, turning it anticlockwise the
lever approaches, clockwise the lever moves
away. Make sure that the correct adjustment
set on the adjustment dial is aligned with the
"▲" mark on the clutch lever.

Shift pedal

the shift pedal is located on the left side of the
motorcycle and is used in combination with
the clutch lever when shifting gear engaged.
4
TIP
Always change down one gear at a time and
at the correct speed to avoid engine overspe-
ed and jamming of the rear wheel.

Brake lever

The brake lever is located on the right side of
the handlebar. To apply the front brake, pull
the lever toward the throttle grip. The brake
lever has a position adjustment knob.
1. Brake lever
2. Distance between brake lever and throttle
grip
3. Brake lever position adjusting knob
4. "▲" mark
3 - 8
1
2
3
4