VALBERG CNF 327 E X742C Instrucciones De Uso página 13

C
Useful information
Problem Possible cause
Heavy build up of frost on
Door seal is not air tight.
the door seal.
Appliance is not level.
The appliance is touching the wall
or other objects.
Unusual noises
A component, e.g. a pipe, on the
rear of the appliance is touching
another part of the appliance or the
wall.
Water on the floor Water drain hole is blocked.
It's normal. Heat exchange parts
Side panels are hot.
are in the sides.
If the malfunction shows again, contact the Service Center.
These data are necessary to help you quickly and correctly. Write the necessary data here, refer
to the rating plate.
22
Solution
Carefully warm the leaking sections
of the door seal with a hair dryer
(on a cool setting). At the same time
shape the warmed door seal by hand
such that it sits correctly.
Re-adjust the feet.
Move the appliance slightly.
If necessary, carefully bend the
component out of the way.
See the Cleaning and Care section.
Take gloves to touch sides if needed.
EN
Note
23 EN