Kemper MaxiFil Instrucciones De Servicio página 73

Mounting the control box
Pos. Description
1 Control box
Carry out the mounting of the control box as follows.
1. Mount the bracket (Pos. 3) for the control box (Pos. 1) at the installation
location under the product using suitable fixing material, paying
attention to the mounting height. (see figure: Determining the
mounting height)
2. Hook the control box (Pos. 1) with the bracket (Pos. 2) into the bracket
(Pos. 3).
3. Mark the bore holes for the bracket (Pos. 4). Then remove the control
box (Pos. 1) and drill the previously marked bore holes.
4. Hook the control box (Pos. 1) back into the bracket (Pos. 3) and fix the
bracket (Pos. 4) in place with suitable fixing material.
1502954-00
Fig. 25: Mounting the control box
Pos.
2, 3, 4 Brackets
Tab. 28: Positions on the product
- 73 -
Description
EN