Kemper MaxiFil Instrucciones De Servicio página 74

Connecting the product
Pos. Description
1 Cable for lighting + on/off of
the extraction hood
2 Motor lead
1. Plug the connector of the lighting cable (Pos. 1) into the appropriate
connection socket of the control box.
NOTE
Cable for lighting + on/off of the extraction hood (Pos.1)
If an extraction arm without lighting + on/off is mounted on the product,
the dummy plug (bridge) included in the scope of supply must be
plugged into the connection socket provided.
2. Plug the connector of the motor cable (Pos. 2) into the appropriate
connection socket of the control box.
3. Plug the measuring hose (Pos. 3) onto the connecting sleeve of the
control box.
1502954-00
Fig. 26: Connecting the product
Pos.
3
4
Tab. 29: Positions on the product
- 74 -
Description
Measuring hose
Power supply connection
(CEE connection socket)
EN