Emos P5521N Manual De Instrucciones página 3

Pressing the CLOCK button during programme setting returns you to the main menu at any time.
TIP: After trying out the set programmes, make sure the setting isn't done in duplicate, especially if you
are setting the days in blocks.
Setting the ON/AUTO/OFF Function
1. Press the ON/AUTO/OFF button and choose from the three modes:
• MANUAL ON – the socket is always on.
• MANUAL OFF – the socket is always off.
• AUTO – the socket runs in accordance with the set programmes.
2. Switching from MANUAL to AUTO leaves the socket in the last setting from MANUAL mode (either
on or off) until reprogrammed.
12/24-Hour Mode
Press the CLOCK and TIMER buttons simultaneously and choose between 12- and 24-hour mode.
Daylight Saving Time
1. Press the CLOCK and ON/AUTO/OFF buttons simultaneously; "SUMMER" will appear on the screen
and the time will shift forward one hour.
2. Pressing the buttons again shifts the time back to its original state.
Reset Button
Pressing the RES/RCL button erases the currently set value, not the socket's entire memory.
RANDOM Button
Only functional in AUTO mode; "RANDOM" will appear on the screen. With this function active, the con-
nected appliance is switched on randomly at ca. 0–32 min intervals from 18:00 to 6:00.
SAFETY WARNINGS
• If the screen isn't working, plug the timer socket into a 230 V AC socket and let it charge – the screen
should light up in about 2 hours and the socket should be fully functional. To recharge fully, leave
it in the socket for approx. 12 hours.
• The device must only be connected to and used with 230 V AC (~)/50 Hz electrical wiring fitted with
a protective contact in line with valid electrical regulations.
• Pay attention to the data on the type label of the appliances connected to the device. Maximum
input power of all connected electrical appliances must not exceed 3 680 W (max. current 16 A).
Max. inductive load: 2 A.
• Make sure that the lead-in protective conductor is not disrupted – the life of the user may be en-
dangered if the protective conductor is disrupted.
• Do not plug the device into sockets with a circuit breaker rated higher than 16 A. The socket may only
be switched with a maximum inductive load of 2 A. Always make sure the plug from the connected
device is fully plugged into the socket.
• Do not leave the connected electrical appliances unattended.
• Never tamper with the electrical circuits of the device or disassemble it! If the device is damaged
or non-functional, contact the seller.
• When cleaning the timer socket, always unplug it from power first. Then clean it using a dry cloth.
Do not use any cleaning agents or immerse the device in water!
• This appliance is not intended for use by persons (including children) whose physical, sensory or
mental disability or lack of experience and expertise prevents safe use, unless they are supervised
or instructed in the use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
• Any use of the device not listed in the previous sections of the manual will result in damage to the prod-
uct and could present danger in the form of a short circuit, injury by electric current, etc. The device
must not be modified or otherwise restructured! Safety warnings must be followed unconditionally.
• Use the timer socket in dry, indoor areas only.
3