Sony SDM-V72W Manual De Instrucciones página 33

Technical Feat ures
Pow er save f unct ion
This display meets the Pow er Save guidelines set
by VESA, E S , and NUTEK. If the display
NERGY TAR
is connected to a computer or video graphics
board that is DPM S (Display Pow er M anagement
Signaling) compliant, the display w ill
automatically reduce pow er consumption as
show n.
Pow er Pow er
M ode Consumption
Normal Operation 49 W (max.)
Active Off * 3 W (max.)
< 2 W (typ.)
Remote Off 3 W (max.)
< 2 W (typ.)
Pow er Off 3 W (max.)
< 1 W (typ.)
* When your computer enters " Active Off" Pow er M ode, the
picture disappears from the screen and " No Input Signal"
appears. After 5 seconds, the display enters pow er save mode.
Downloaded from: https://www.usersmanualguide.com/
Preset and user modes
When the display receives an input signal, it
automatically matches the signal to one of the
factory preset modes stored in the display's
memory to provide a high quality picture at the
center of the screen. (See appendix on pages 41
and 42 for a list of the factory preset modes.)
For input signals that do not match one of the
factory preset modes, the automatic picture
quality adjustment function of this display
Pow er
automatically adjusts the picture position, phase,
indicator
and pitch to ensure that a clear picture appears
Green
on the screen for any timing w ithin the display's
Amber
clock speed range.
Red Horizontal frequency
Vertical frequency
Off Resolution
Pixel clock
Consequently, the first time the display receives
input signals that do not match one of the
factory preset modes, the display may take a
longer time than normal to display the picture on
the screen. This adjustment data is automatically
stored in memory so that next time, the display
w ill function in the same w ay as w hen the
display receives the signals that match one of the
factory preset modes.
28 - 70 kHz
48 - 85 Hz
1280 x 768/60 Hz or less
94.5 M Hz max.
- 32 -
In all modes mentioned previously, if the picture
is adjusted, the adjustment data is stored as a
user mode and automatically recalled w henever
the same input signal is received.