Cont rolling t he volume
Downloaded from:
https://www.usersmanualguide.com/
Using the display's speakers or headphones, you
can listen to sound from your computer or other
POWER
MENU
audio equipment connected to the display's
DK
WIDE
audio input jacks.
INPUT
You can control the volume by using + /- buttons
located at the right side of the display or on the
remote card. When either button is pressed
volume status w ill appear on your display screen.
1
Press t he +/- but t ons t o display volume
st at us.
2
Press t he +/- but t ons t o cont rol t he
volume.
The volume status w ill automatically disappear
after about 3 seconds.
Use the M UTE button to mute the sound. Press
M UTE again or + Volume button on the remote
card to restore the sound.
- 33 -
Using t he headphones
By connecting your headphones to the display's
headphone jack, you can listen to sound from
your computer or other audio equipment
connected to the display's audio input jacks.
Be sure to remove the headphones before
moving aw ay from the display. If the headphone
cord is pulled aw ay from the display abruptly,
injury or damage may occur.
While displaying the main menu on
z
the screen, use the +/- Volume buttons on
the remote card to adjust the volume. The
+/- Volume buttons on the side of the
display become selection buttons w hen the
main menu is displayed.
When your display is in pow er save mode (in
PC mode), no sound comes from the
speakers or the headphones.