Klafs SL 033 Instrucciones De Operación página 10

5. Operation
5.6. Starting Softclima
'
For operation follow the prerequisites and the program table on page 9!
FIRE RISK!
Before starting the control system, always check that there are no inflammable objects
on or near the sauna heater.
'
Start the evaporator as described in 5.9., 5.11.
1. Press the MODE button.
.
The last selected mode and settings appear on the display.
2. If necessary press the MODE button again until the symbol Cloud appears
the display.
.
After the heating phase the Bather symbol
use.
'
If you want to change the values for the selected program - see Section 6.
5.7. Starting Infraclima
'
For operation follow the prerequisites and the program table on page 9!
FIRE RISK!
Before starting the control system, always check that there are no inflammable objects
on or near the sauna heater.
'
Start the evaporator as described in 5.9., 5.11.
1. Press the MODE button.
.
The last selected mode and settings appear on the display.
2. If necessary press the MODE button again until IR and the Cloud symbol
display.
.
After the heating phase the Bather symbol
use.
'
If you want to change the values for the selected program - see Section 6.
PAGE 10
Sauna/Infrarot/Softclima/Infraclima
appears on the display. The cabin is ready for
appears on the display. The cabin is ready for
without the IR in
appear on the
50701103/02.13