Klafs SL 033 Instrucciones De Operación página 17

Sauna/Infrarot/Softclima/Infraclima
6. Individual settings
6.4. Setting the bathing time
'
For operation follow the prerequisites and the program table on page 9!
1. Select the menu
.
The changeable value flashes.
2. Change the flashing value with the up/down
.
The standard bathing time is 4 hours.
3. Confirm the setting with the
.
The flashing value changes to a permanent display.
.
If the value deviates from a standard program, the value is automatically stored in the individual
program of the active bathing program.
.
The remaining bathing time appears on the display together with the symbol
6.5. Setting the preselect operation
'
For operation follow the prerequisites and the program table on page 9!
FIRE RISK!
Before starting the control system, always check that there are no inflammable objects
on or near the sauna heater.
1. Select the menu
2. Set the preselection with the up/down
3. Confirm the selected time with the
4. Allowing for the warm-up time, the program is started automatically. The cabin is ready for use at
the selected time.
.
The preselect operation can be ended by selecting the End mode.
The control panel starts before the selected time!
50701103/02.13
Ñ Ñ
with the left/right
Ñ Ñ
button.
Ñ Ñ
with the left/right
Ñ
buttons.
Ñ Ñ
button.
buttons.
Ñ Ñ
buttons.
buttons.
(Hourglass).
PAGE 17