Publicidad
Idiomas disponibles
Idiomas disponibles
6.
Individual settings
6.1.
Program selection
'
For operation follow the prerequisites and the program table on page 9!
FIRE RISK!
Before starting the control system, always check that there are no inflammable objects
on or near the sauna heater.
1.
Select the menu
2.
Select the program with the up/down
.
The changeable value flashes.
3.
Confirm the selection with the
.
The flashing value changes to a permanent display. After the confirmation the selected bathing
program is started.
6.2.
Setting the temperature
'
For operation follow the prerequisites and the program table on page 9!
1.
Select the menu
.
The changeable value flashes.
2.
Change the flashing value with the up/down
3.
Confirm the setting with the
If the value deviates from a standard program, the value is automatically stored in the
individual program of the active bathing program.
6.3.
Setting the humidity, Softclima or Infraclima
'
For operation follow the prerequisites and the program table on page 9!
1.
Select the menu
2.
Change the nominal value of the bar display
3.
Confirm the setting with the
If the value deviates from a standard program, the value is automatically stored in the
individual program of the active bathing program.
PAGE 16
Ñ
with the left/right
Ñ Ñ
Ñ Ñ Ñ
buttons.
button.
Ñ Ñ Ñ
with the left/right
button.
Ñ Ñ
with the left/right
Ñ
button.
Sauna/Infrarot/Softclima/Infraclima
buttons.
buttons.
Ñ Ñ
buttons.
buttons.
with the up/down
Ñ Ñ Ñ
buttons.
50701103/02.13
Publicidad
