Terra | Terra Sx
|
Electric Wheelchair
Armrest gap
•
You can adjust the position of the control unit to your forearm
length.
•
Undo the hand screw on the outside of the sideguard.
•
Fit the control unit in position and re-tighten the screw (Fig. 13).
Swivel
•
The control unit can be swivelled to the side. It clicks into the arm-
rest extension and can be swung fully outwards. (Fig. 14).
Using the control unit is explained in
Chapter 4. "Using the wheelchair"
3.5.7. Lap belt
13
The lap belt is fitted to the seat frame.
•
Adjust the belt length to suit your requirements, by positioning the
buckle accordingly.
•
Fasten the belt with the buckle (Fig. 15).
•
Open the belt by pressing the red button on the buckle.
4. Using the wheelchair
14
Once you have adjusted the wheelchair to your personal needs, famil-
iarise yourself with the functions of the control unit.
15
66
Electric Wheelchair
4.1. Functional description of the
VR2 control unit
Bischoff & Bischoff GmbH |2022-09-09 - Revision: 3
|
Terra | Terra Sx
16
17
67