English
10 Cable duct
The guide wire is routed in the middle cable
duct.
11 Cable duct
The perimeter wire is routed in the outer
cable ducts.
# Rating plate with the machine number
12
12 Ground peg
The four ground pegs secure the docking sta‐
tion to the ground.
3.5
iMOW
Ruler and Installation
®
Kit
®
iMOW
Ruler
1
1 iMOW
®
Ruler
The ruler makes it easier to install wires and
serves to maintain the correct distance.
Installation Kit
An installation kit is required to commission the
robot mower; it is not included in the scope of
delivery of the robot mower. Appropriate installa‐
tion kits are available as accessories for different
garden sizes.
50
1
2
3
1 Fixing pin
The fixing pin secures the perimeter wire and
guide wire to the ground.
2 Wire connector
The wire connector connects wire ends to
each other.
3 Cable markers
The cable markers serve to mark wire ends
on the inside of the docking station. They
facilitate the assignment of the wire ends
when connecting to the correct terminal.
4 Wire coil
The wire coil is required to install the perime‐
ter wire and guide wire.
3.6
Symbols
Meanings of symbols on the robot mower, dock‐
ing station, power supply or installed battery:
This symbol shows the diameter of the
blade disk.
This symbol indicates the direction for
unlocking the blade carrier when
changing blades.
This symbol indicates the direction for
locking the blade carrier when chang‐
ing blades.
Protection class 2, double insulated.
Do not dispose of the product with domes‐
tic waste.
The information next to this symbol indi‐
cates the energy content of the battery
according to the cell manufacturer's specifi‐
cation. The energy content available during
use is lower.
1 LED lights up red. The battery is too
warm or too cold.
4 LEDs flash red. There is a fault in the
battery.
3 Overview
4
0458-012-9801-A