4 Safety Precautions
► Route the connecting cable, extension
cable and charging cable so that they are
not on a permanently wet surface.
■ If electrical wiring and conduits are routed in
the wall, they may be damaged if the power
supply is mounted on the wall. Contact with
wiring can result in electric shock. This may
result in serious injury to people and damage
to property.
► Make sure there is no electrical wiring or
conduits in the wall at the proposed mount‐
ing site.
► Mount the power supply on a wall as descri‐
bed in this User Manual.
■ If the power supply is connected to a genera‐
tor, the electricity supply cannot be perma‐
nently ensured and the robot mower may not
function properly. The power supply may be
damaged by fluctuations in the electricity sup‐
ply.
► Only connect the power supply to a prop‐
erly installed socket.
4.10
Transporting
4.10.1
Robot mower
WARNING
■ The robot mower may tip over or move during
transport. This may result in injury to people
and damage to property.
► Stop the robot mower and activate
the device lock.
► Secure the robot mower with lashing straps,
belts or a net so that it cannot tip over or
move.
4.10.2
Battery
The battery has been installed in the robot
mower and must only be removed by a STIHL
authorized dealer.
WARNING
■ The battery is not protected against all envi‐
ronmental conditions. The battery may be
damaged if it is exposed to certain ambient
conditions, and damage to property may
occur.
► Never transport a damaged battery.
■ The battery may turn over or shift during trans‐
port. Persons may be injured, or property may
be damaged.
► Pack the battery in packaging in such a way
that it cannot move.
0458-012-9801-A
► Secure the packaging so that it cannot
move.
4.10.3
Docking station and power supply
WARNING
■ The docking station or power supply may tip
over or move during transport. This may result
in injury to people and damage to property.
► Disconnect the mains plug from the wall
socket.
► Remove the robot mower from the docking
station.
► Secure the docking station and power sup‐
ply with lashing straps, belts or a net to
ensure that they cannot tip over or move.
■ The connecting cable and charging cable are
not intended to carry the weight of the power
supply or docking station. The connecting
cable, power supply, charging cable or dock‐
ing station may be damaged.
► Disconnect the charging cable from the
power supply and docking station and coil
it.
► Grip the docking station by the base plate
and hold it firmly.
► Wind up the connecting cable and attach it
to the power supply.
► Grip the power supply by the housing and
hold it firmly.
4.11
Storing
4.11.1
Robot mower
WARNING
■ Children are not aware of and cannot assess
the dangers of the robot mower. Children may
be seriously injured.
► Stop the robot mower and activate
the device lock.
► Store the robot mower out of the reach of
children.
■ Moisture may cause the electrical contacts on
the robot mower and metal components to
corrode. The robot mower may be damaged.
► Store the robot mower in a clean and dry
condition.
■ The robot mower may start unintentionally and
begin to move if its device lock is not activated
before storage. This may result in serious
injury to people and damage to property.
English
57