Descargar Imprimir esta página

Craftsman 580.752360 Manual Del Operador página 14

Ocultar thumbs Ver también para 580.752360:

Publicidad

Idiomas disponibles

Idiomas disponibles

PRODUCT SPECIFICATIONS
Pressure Washer Specifications
Pressure . . . . . . . . . . . . . . . . . . . . . 3,000 PSI
Flow Rate. . . . . . . . . . . . . . . . . . . . . 2.8 GPM
Detergent Mix . . . . . . . . . . . . . . . . . Use as directed
Water Supply Temperature . . . . . . . Not to exceed 100°F
Pump Oil Capacity . . . . . . . . . . . . . . 9.6 fl. oz. (0.28 l)
Engine Specifications
Rated Horsepower . . . . . . . . . . . . . . . 6.5 at 3600 rpm
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7 in. (68 mm)
Stroke . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 in. (54 mm)
Displacement . . . . . . . . . . . . . . . . . . . 12.0 in. (196 cc)
Spark Plug
Resistor . . . . . . . . . . . . . . . . . . . . NGK BPR6ES
Set Gap To: . . . . . . . . . . . . . . . . . . . 0.028-0.031 in (0.70-0.80
Intake Valve Clearance . . . . . . . . . . . . 0.15 ± 0.02 mm (cold)
Exhaust Valve Clearance . . . . . . . . . . . 0.20 ± 0.02 mm (cold)
Fuel Capacity . . . . . . . . . . . . . . . . . . . 0.95 Gallons
Oil Type . . . . . . . . . . . . . . . . . . . . . . . SAE 10W-30
This pressure washer is rated in accordance to the Pressure
Washer Manufacture Association (PWMA) standard PW101
(Testing and Rating Performance of Pressure Washers).
All manuals and user guides at all-guides.com
MAINTENANCE
mm)
14
OWNER'S RESPONSIBILITIES
Follow the hourly or calendar intervals, whichever occurs
first. More frequent service is required when operating in
adverse conditions noted below.
Maintenance Schedule
First 20 Hours
• Change engine oil
Every 8 Hours or Daily
• Check/clean water inlet screen
• Check high pressure hose
• Check detergent siphoning hose
• Check spray gun and assembly for leaks
• Clean debris
• Check air filter
• Check engine oil level
Every 50 Hours or 3 Months
• Clean air filter
2
Every 100 Hours or 6 Months
• Change engine oil
• Clean sediment cup
• Check/adjust spark plug
• Service spark arrester
• Clean fuel tank and filter
Every 200 Hours or 3 Months
• Change pump oil
5
Every 300 Hours or Yearly
• Replace air filter
3
• Replace spark plug
• Check adjust idle speed
• Check adjust valve clearance
Every 500 Hours
• Clean cumbustion chamber
Every 2 Years
• Check fuel tube (replace if necessary)
1
Clean if clogged. Replace if perforated or torn.
2
Service more often under dirty or dusty conditions.
3
Replace paper element only.
4
These items should be serviced by your servicing dealer.
5
Change after first 50 hours of operation and then every 200 hours or 3 months,
whichever occurs first.
1
1
4
4
4
4

Publicidad

loading