BM2 BIEMMEDUE CRYO BAT - 12V Manual De Instalación página 22

EN
• In case of burn caused by frost, avoid massaging the area of interest and ask for
the intervention of a medic.
• Exclusively use food CO
• Do not use cylinders containing gas at a pressure higher than what is indicated
on the label (1a) located on the bottom of the appliance (1) (figure "F2") and in the
paragraph "Technical data" of this manual.
Never load the cylinder beyond the maximum advised pressure
indicated on the cylinder itself and in the paragraph "Technical data"
of this manual.
• Dry the tank and the glass before using the appliance. Carbon dioxide snow or dry
ice could form otherwise.
• Only use water to clean the appliance.
Do not use trichloroethylene , abrasive solvents or detergents.
• Do not position the appliance next to a source of heat (ovens, heating appliances
or hot radiators).
• Do not expose the battery to a temperature higher than 40°C.
Use the appliance on flat and stable surfaces resistant against water
and vapour.
• Make sure the connection hose with the cylinder and the power cord (if the appliance
is connected to the battery charger) do not constitute an obstacle to movements
around the appliance to avoid that someone could even inadvertently, pull them
toppling the cord and/or the cylinder.
• Possible repairs must be carried out only by specialists equipped with the original
spare parts supplied by the manufacturer.
• Repairing the appliance by yourself could be extremely dangerous.
• The appliance is designed for both domestic and professional use.
In case of use of the appliance in small closed environments, ensure
that an appropriate ventilation system is present to avoid that the
concentration of CO
EN - 4
GENERAL WARNINGS
as filling gas for the cylinder.
2
may harm human health (value >0,5%).
2
CRYO BAT