Descargar Imprimir esta página

BM2 BIEMMEDUE CRYO BAT - 12V Manual De Instalación página 28

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

EN
HOW TO CHARGE THE BATTERY
Advices to preserve the battery.
-
During operation, the battery charger heats up slightly: this is an absolutely normal phenom-
enon.
-
If you do not intend to use the appliance for a long period of time (example: during holidays),
it is advised to charge the battery entirely before disconnecting the power adapter and stor-
ing the appliance. Repeat this operation at least every 3 months.
-
When the battery is almost completely low, proceed with its charge.
Avoid discharging the battery entirely.
USE OF THE APPLIANCE
a. Make sure the appliance is switched on (switch "14" set to "I") and that the battery is charged
(one or more LEDs "18" on).
b. Open the tap of the cylinder (figure "F8").
c. Grab the glass you want to cool down and overturn it on the supply nozzle (16).
F10
"START"
"X"
14
18
EN - 10
16
16
(Fig. F10 - F11)
"STOP"
11
CRYO BAT

Publicidad

loading