Publicidad
Idiomas disponibles
Idiomas disponibles
1. Important Safety Information
WARNING! Danger from improper use!
Read all instructions and safety notes before using the device. Follow them carefully.
•
Danger of health damage or even death due to improper or excessive training!
•
•
The device is not suitable for medical purposes and high accuracy applications.
Also apply common sense to prevent risks.
•
GENERAL PERSONAL REQUIREMENTS
WARNING! Overexertion can lead to permanent harm or even death. Prevent overexertion of
yourself or anyone else on the training device!
•
Only persons who are physically and mentally fit may use the training device. Persons with
disabilities may only use the device with suitable supervision and assistance.
•
Always consider the individual basic fitness and daily form of the person exercising.
Use the pulse rate and the general well-being to assess this. Pulse reading systems may be
•
inaccurate. Do not continue training if you feel unwell, weak, have aching limbs, chest pain, nausea,
shortness of breath or similar.
•
If necessary, seek medical advice before training; especially when you are older or have medical
problems, or when you have only little experience in physical training.
•
The maximum permitted weight for using the training device is 110 kg (243lb).
PREPARING THE TRAINING DEVICE
SHORTLY AFTER UNPACKING
DANGER! Risk of suffocation! After unpacking for the first time, keep plastic bags and the like
•
away from children and pets.
•
Keep the packaging material during the return period to facilitate a possible return of the goods.
Dispose of the packaging material later in accordance with local regulations (e.g. recycling).
GENERAL
•
Use the training device only indoors. Put it onto a firm and level ground. Use a mat to prevent
damage to the ground.
•
Ensure a minimum free space of 2 m (6,6 ft) around the training device.
•
Apply the training device only for private use, but not for commercial use.
•
Do not attempt any maintenance or adjustments other than those described in this manual. In case
of any problems, stop using the device and consult an Authorized Service Representative.
•
When assembling the device, make sure to use all required parts for the connections (e.g.,
washers).
•
Before each training session, make sure that all connections are tightly fastened. Re-tighten, if
necessary.
•
Also check before each training that all securing parts (e.g., lock pins, protective covers) are
applied and that all other parts of the device are in proper condition.
•
Note the advices for handling the power supply.
EN
DE
27
Publicidad
