SPORTSTECH CX625 Manual De Usuario página 34

2.8 INSTALLATION OF THE SENSOR BRACKET
Remove two screws (19), two washers (20) and two PVC washers (21) from the front pillar (2) and keep
•
them safely.
Guide the hand pulse sensor cable (14) from the sensor bracket (11) through the hole in the front pillar
•
(2) . Then pull them to the top end (2).
• Fix the sensor bracket (11) to the front pillar with the previously removed parts (2).
2.9. MOUNTING THE COMPUTER
Remove four screws (17) from the back of the computer (16).
•
Connect sensor cable I (18) and hand pulse sensor cable (14) to the cables coming from the
•
computer (16).
Fix computer (16) with the previously removed four screws (17) to the top of the front pillar (2).
•
34
19 20
21
11
M5 x 10 mm
M8 x 15 mm
Ø8 x Ø16 mm
Ø10 x Ø20 mm
14
19
2
19
20
21
16
18
14
17
2